Benefits

Copper Control will help to keep ionic copper dissolved in your pool or hot tub. It will also remove copper stains from pool and hot tub surfaces.

Purchase for $29.99

Directions for Use

Chelating Dissolved Copper (Maintenance)

1. Make sure copper level tests at 0.5ppm or higher
2. Balance pH to 7.6 – 7.8. This product will naturally lower the pH
3. Balance alkalinity to 80-120ppm
4. • For Pools: Add 8 oz (1/4 package) for every 10,000 gallons of water
   • For Hot Tubs: Add 0.2 oz (6 grams) for every 250 gallons of water
   • Test water for copper after 24 hours and add more if needed
5. Adjust pH to 7.2 – 7.8 if needed
6. Repeat this process every 4-6 weeks

Copper Stain Removal

Copper stains can appear on the sides or bottom of the pool as blue/green or black patches.

To remove blue/green or black stains from the pool bottom

1. Sprinkle Copper Control on the water over the stained area until the stain is completely covered
2. Wait for the product to dissolve and disappear
3. Repeat steps 1 and 2 until the stain is reduced or removed

To remove blue/green or black stains from pool sides or other surfaces

1. Wet a sponge with pool water
2. Sprinkle Copper Control on the sponge liberally
3. Rub the sponge with the Copper Control lightly on the stained area
4. Repeat until the stain is removed

Safety Information

Please download the safety datasheet here.